In-Line Eductor

(image for) In-Line Eductor
In-Line Eductor
  • Model: CES95
  • Manufactured by: Chemguard

 Ask a Question 

In-Line Eductor

Corrosion Resistant Brass Construction
1-1/2” swivel inlet X 1-1/2”male outlet
Eductor rated for optimum flow at 200 PSI (14 Bar)
Furnished with 30”(76cm) pick up tube
Variable metering valve
Removable metering valve
A large, easy to read metering dial
Ball check valve prevents back flow into foam concentrate

Operating Procedures
Must be used with a nozzle of equivalent flow rate
Maximum hose lay between eductor and nozzle on level ground using 1½"(3.8 cm) hose is 150 ft.(46m)
Maximum hose lay between eductor and nozzle on level ground using 2"(5 cm) hose is 300 ft.(91m)
Normal inlet operating pressure at eductor is 200 psi; however, the eductor can be used at lower inlet pressures with a corresponding reduction in flow rates

* Pressure loss through the Chemguard eductor is approximately 35% of the inlet pressure

Suitable for use with water, AFFF, AR-AFFF, Fluoroprotein and Class “A” foam concentrates
Copyright © 2025 Sea Safety & Survival. Powered by Zen Cart